A standard US business card is 3.5 × 2 inches. At 300 DPI, the resolution most printers ask for, that is 1050 × 600 pixels. If your printer wants a 1/8-inch bleed on every side, make the file 1125 × 675 pixels. European cards (85 × 55 mm) are 1004 × 650 pixels at 300 DPI, and Japanese cards (91 × 55 mm) are 1075 × 650 pixels.
Standard business card sizes by country
Card sizes vary by region. Before you design anything, check which size your printer actually cuts.
| Region | Size (mm) | Size (inches) | Aspect ratio |
|---|---|---|---|
| US and Canada | 88.9 × 50.8 | 3.5 × 2 | 1.75:1 |
| UK and most of Europe | 85 × 55 | 3.35 × 2.17 | about 1.55:1 |
| Japan | 91 × 55 | 3.58 × 2.17 | about 1.65:1 |
| Australia and New Zealand | 90 × 55 | 3.54 × 2.17 | about 1.64:1 |
| China | 90 × 54 | 3.54 × 2.13 | about 1.67:1 |
| Credit card size (ISO ID-1) | 85.6 × 53.98 | 3.37 × 2.125 | about 1.59:1 |
For a vertical card, keep the same size and swap the width and height. A vertical US card is 2 × 3.5 inches.
Business card size in pixels at 300 and 600 DPI
To convert, multiply the physical size by the resolution:
pixels = inches × DPI
pixels = millimeters ÷ 25.4 × DPIValues are rounded to the nearest whole pixel:
| Card | 300 DPI (standard print) | 600 DPI (extra sharp) |
|---|---|---|
| US / Canada, 3.5 × 2 in | 1050 × 600 | 2100 × 1200 |
| Europe / UK, 85 × 55 mm | 1004 × 650 | 2008 × 1299 |
| Japan, 91 × 55 mm | 1075 × 650 | 2150 × 1299 |
| Australia / NZ, 90 × 55 mm | 1063 × 650 | 2126 × 1299 |
| China, 90 × 54 mm | 1063 × 638 | 2126 × 1276 |
| Credit card size, 85.6 × 53.98 mm | 1011 × 638 | 2022 × 1275 |
300 DPI is the usual standard for print. Sending more pixels than that does no harm, because the printer scales the file down. Sending fewer makes text and logos look soft.
The pixel count is what matters. The DPI value stored in a file is only a label. A 1050 × 600 image printed on a 3.5 × 2 inch card comes out the same whether its metadata says 72 or 300. Our DPI vs PPI explainer covers the difference.
Add bleed and keep a safe area
Printers cut cards from large sheets, and the blade can drift slightly. Two margins protect your design:
- Bleed is extra background beyond the cut line. If the cut drifts, you still don't get a white sliver on the edge. US printers usually ask for 1/8 inch (0.125 in) per side, and metric printers usually ask for 3 mm per side.
- Safe area is a margin inside the cut line. Keep text, logos and anything else that must not be trimmed inside it. A common minimum is 1/8 inch or 3 mm inside the trim, and 5 mm gives you more room.
Your printer's spec sheet always wins. Some printers want 2 mm of bleed and others want 5 mm.
File sizes with bleed (300 DPI)
| Card | Trim size | Bleed per side | Full file size |
|---|---|---|---|
| US / Canada | 3.5 × 2 in (1050 × 600 px) | 1/8 in (about 38 px) | 3.75 × 2.25 in = 1125 × 675 px |
| Europe / UK | 85 × 55 mm (1004 × 650 px) | 3 mm (about 35 px) | 91 × 61 mm = 1075 × 720 px |
| Japan | 91 × 55 mm (1075 × 650 px) | 3 mm | 97 × 61 mm = 1146 × 720 px |
| Australia / NZ | 90 × 55 mm (1063 × 650 px) | 3 mm | 96 × 61 mm = 1134 × 720 px |
Worked example: a US card with bleed
On a 1125 × 675 px canvas:
- The cut line sits 37.5 px in from each edge and encloses the 1050 × 600 trim area.
- The safe area starts 1/8 inch inside the cut line, which is 75 px from each canvas edge. That leaves 975 × 525 px (3.25 × 1.75 in) for text and logos.
- Backgrounds, photos and color blocks run all the way to the canvas edge.
For a European card on a 1075 × 720 canvas with 3 mm bleed and a 3 mm safe margin, keep text at least 6 mm (about 71 px) from every canvas edge. Avoid thin borders close to the edge of the card. If the cut drifts even slightly, the border ends up thicker on one side than the other. Either make the border thick enough to sit well inside the safe area, or leave it out.
Digital business cards
A card that only lives on a screen needs no bleed and has no DPI requirement. Only the pixel count matters. Common formats:
- An image of your card to send in messages or post online. Keep the printed card's ratio and use twice the 300 DPI size, for example 2100 × 1200 for a US-ratio card, so it stays sharp on high-density phone and laptop screens.
- A portrait card that fills a phone screen. Use 1080 × 1920 (9:16), the same size as an Instagram Story.
- An email signature. This is usually a small banner or an HTML block rather than a full card. Picify's email signature maker exports a 600 × 200 PNG or JPG, or you can copy the signature as HTML. For setup in Gmail and Outlook, see how to make an email signature.
- A QR code on the printed card that saves your contact details to the scanner's phone. The QR code generator has a vCard type with first name, last name, email, phone, company, title and website fields. More data makes a denser code, so a vCard QR needs more space on the card than a short URL. Always test-print the card and scan it with a phone before you order. If you add a logo to the code, use the PNG download, because the SVG export leaves the logo out.
Set up a business card canvas in Picify's editor
The Picify editor runs in your browser and needs no account to design or export. It includes a business card preset.
- Open the editor and choose File ▸ New Project.
- Open the Print presets and select Business Card. This sets 1050 × 600 px, which is a US card at 300 DPI.
- For another card size or a file with bleed, set the units to Pixels and type the width and height from the tables above. For example, a US card with bleed is 1125 × 675. For a vertical card, swap the two numbers.
- Set the resolution to Print High (300) and the background to White.
- Click Create Project.
- Mark the safe area. Draw a rectangle with the Rectangle tool (
U). In the Properties panel, use Position & Size to make it the size of the safe area (975 × 525 px for a US card with bleed) and place it 75 px in from each edge. Lower its Opacity: so you can see through it, then lock it with the lock toggle in the Layers panel. Rulers (View ▸ Rulers, ⌘R or Ctrl+R) and guides (View ▸ Guides) help with placement. - Design the card. Run backgrounds to the canvas edges and keep text and logos inside the safe rectangle.
- Hide the safe-area rectangle with its eye toggle, or delete it. Then choose File ▸ Export as ▸ PNG and open the downloaded file to check it before you send it anywhere.
- For the back of the card, create a second project at the same size. Each project opens in its own tab inside the editor.
Things to know before you send the file to a printer:
- Exports are twice the canvas size. A 1050 × 600 canvas exports as a 2100 × 1200 file, which is 600 pixels per inch on a 3.5 × 2 inch card. The proportions are unchanged, so most printers accept it. If your printer insists on exact pixel dimensions, scale the file down with the image resizer.
- The output is RGB. Choosing CMYK Color in the New Project dialog only changes the Est. File Size readout. It does not convert the file.
- There are no crop marks or automatic bleed. You build the bleed into the canvas size yourself, as described above.
- The PDF export is a picture, not vector print data. It is one page containing a PNG of your design, so it has no print advantage over the PNG. Send whichever format your printer accepts.
- Projects are saved in this browser only. They auto-save, but there is no cloud copy, and clearing site data deletes them. Keep your exported files if you plan to reorder later.
- Fonts: you can choose from 44 built-in fonts. You can't upload your own.
If you'd rather start from a layout, the business card template creator has preset designs and downloads PNG or JPG once you sign in to a free account. Check the downloaded file's pixel size against the tables above before you send it to print. For layout ideas, see business card design ideas. For the whole process from design to order, see how to make a business card online.
If your printed card doesn't come out right
- A thin white line on one edge. The file had no bleed, or the background stopped at the trim line. Fix: enlarge the canvas to the full bleed size and extend the background to every edge.
- Text or the logo is clipped or sits too close to the edge. It was outside the safe area. Fix: move everything important at least 1/8 inch or 3 mm inside the cut line.
- Blurry text or logo. The canvas was too small (for example, 72 DPI pixel sizes), or a small logo file was stretched. Fix: build the card at the 300 DPI pixel sizes above and use the largest logo file you have. For scale, a 1024 × 1024 px logo covers about 3.4 inches at 300 DPI, which is far wider than any logo on a card.
- The card looks cropped or has white bands. The file's proportions don't match the card you ordered, for example a European 85 × 55 mm file sent to a US printer. Fix: rebuild the file at the size the printer's card stock uses.
- Colors look duller on paper. Screens show RGB, printers use CMYK ink, and very bright screen colors can come out muted. Fix: order a proof or print a test sheet before a large run.
- The printer rejects the file. Some printers require CMYK PDFs with crop marks, which Picify doesn't export. Fix: ask whether they accept an RGB PNG that already includes bleed. If they don't, convert the file in a tool that outputs the format they require.
FAQ
How many pixels is 3.5 × 2 inches?
It's 1050 × 600 pixels at 300 DPI, or 2100 × 1200 pixels at 600 DPI. With a 1/8-inch bleed on each side, a 300 DPI file is 1125 × 675 pixels.
Is a business card the same size as a credit card?
Not quite. A credit card is 85.6 × 53.98 mm (3.37 × 2.125 in), which is slightly narrower and slightly taller than a US business card. It is close to the European 85 × 55 mm card but not the same.
Can I design a business card at 72 DPI?
Only if the card will stay on screen. At 72 DPI a US card is only 252 × 144 pixels, which prints visibly soft. For print, use the 300 DPI pixel sizes above.