The difference between DPI and PPI comes down to the device. PPI (pixels per inch) describes a digital image: how many of its pixels fill one inch when it is printed. DPI (dots per inch) describes a printer: how many dots of ink or toner it lays down in one inch. Most people say "300 DPI" when they mean 300 PPI. For print, the rule you need is width in inches × 300 = width in pixels, and the same for height.
A 1080×1080 Instagram image prints sharp at 3.6 × 3.6 inches. A Letter-size flyer needs 2550×3300 pixels. The DPI value saved inside a file doesn't change either of those numbers.
DPI vs PPI: what each one measures
PPI is a ratio between pixels and physical size. An image is a grid of pixels, for example 2400 × 3000. It has no physical size until you decide how big to print it. Print it at 8 × 10 inches and it is 300 PPI. Print the same file at 16 × 20 inches and it is 150 PPI. The pixel count doesn't change, but each pixel covers more paper.
DPI is a printer property. A printer can't lay down a pixel's exact color as one solid square. It builds each color from many tiny dots of a few inks, which is why printer specs list numbers like 1200 or 2400 DPI. You never need an image at your printer's DPI. You need it at the PPI your print shop asks for, usually 300.
Image files can also store a resolution number, often labeled "DPI" in apps. That number is a note that says "print me at this many pixels per inch." Some programs use it to choose a default print size. It doesn't add or remove pixels.
Why print shops ask for 300
Commercial printing reproduces images with a halftone screen, commonly around 150 lines per inch. The usual guidance is to supply about twice that in image resolution, which is where 300 PPI comes from. At reading distance, 300 PPI looks sharp for photos and small text.
Large prints viewed from a few feet away, such as posters and banners, often look fine at 150 PPI. Ask your print shop before you plan a large print at the lower figure.
Why screens ignore DPI
A screen draws an image on its own grid of pixels. Web browsers size an image by its pixel dimensions and the zoom level, not by the resolution note. Save a 1200×630 image once at "72 DPI" and once at "300 DPI", and both look the same on a web page.
That also means saving web images "at 72 DPI" doesn't make them smaller. File size depends on the pixel count, the format and the compression. See how to reduce image file size for the changes that actually shrink a file.
The 72 and 96 figures come from old conventions: early Macs assumed 72 pixels per inch on screen, and Windows assumed 96. Real screens vary widely today. A 27-inch 1920×1080 monitor has about 82 PPI, and phone and laptop screens pack in far more. High-density screens draw each web pixel with 2 or more device pixels, so images with extra pixels look crisper on them.
For screen work, think in pixels: 1080×1080 for an Instagram post, 1280×720 for a YouTube thumbnail. For print, think in inches × PPI.
Pixels needed for common print sizes at 300 PPI
Multiply each side in inches by 300. For metric sizes, divide millimeters by 25.4 first. The 150 PPI column is for large prints viewed from a distance, if your printer accepts it.
| Print size | Inches | Pixels at 300 PPI | Pixels at 150 PPI | Picify starting point |
|---|---|---|---|---|
| Business card (US) | 3.5 × 2 | 1050 × 600 | 525 × 300 | Editor preset Business Card |
| Photo 4×6 | 4 × 6 | 1200 × 1800 | 600 × 900 | Editor preset Photo 4x6 |
| Photo 5×7, invitation | 5 × 7 | 1500 × 2100 | 750 × 1050 | Photo 5x7 preset; Invitation Card, Wedding Invitation, Save the Date templates |
| A5 | 5.83 × 8.27 | 1748 × 2480 | 874 × 1240 | A5 Portrait and Flyer (A5) presets |
| Book (6×9 trim) | 6 × 9 | 1800 × 2700 | 900 × 1350 | Book Cover template |
| Photo 8×10 | 8 × 10 | 2400 × 3000 | 1200 × 1500 | Photo 8x10 preset |
| A4 | 8.27 × 11.69 | 2480 × 3508 | 1240 × 1754 | A4 Portrait / A4 Landscape presets |
| US Letter | 8.5 × 11 | 2550 × 3300 | 1275 × 1650 | Letter Portrait preset; Flyer, Letterhead, Sticker Sheet templates |
| Photo 11×14 | 11 × 14 | 3300 × 4200 | 1650 × 2100 | Photo 11x14 preset |
| Tabloid | 11 × 17 | 3300 × 5100 | 1650 × 2550 | Custom size |
| A3 | 11.69 × 16.54 | 3508 × 4961 | 1754 × 2480 | A3 Portrait preset |
| Poster 18×24 | 18 × 24 | 5400 × 7200 | 2700 × 3600 | Poster 18x24 preset; Poster and Event Poster templates |
| Poster 24×36 | 24 × 36 | 7200 × 10800 | 3600 × 5400 | Custom size |
These sizes don't include bleed (covered below). For layouts and more sizes, see poster sizes in pixels, flyer size in pixels and business card size in pixels.
How big an image you already have will print
Reverse the math: pixels ÷ 300 = largest sharp print size in inches.
| Image size (pixels) | Typical source | Max print at 300 PPI | Max print at 150 PPI |
|---|---|---|---|
| 1024 × 1024 | Picify AI generators (most) | 3.41 × 3.41 in | 6.83 × 6.83 in |
| 1536 × 1024 | Picify AI banner, certificate, slide | 5.12 × 3.41 in | 10.24 × 6.83 in |
| 1024 × 1536 | Picify AI book cover | 3.41 × 5.12 in | 6.83 × 10.24 in |
| 1080 × 1080 | Instagram post | 3.6 × 3.6 in | 7.2 × 7.2 in |
| 1920 × 1080 | 1080p video frame | 6.4 × 3.6 in | 12.8 × 7.2 in |
| 3840 × 2160 | 4K video frame | 12.8 × 7.2 in | 25.6 × 14.4 in |
This is why an AI-generated cover or certificate looks good on screen but soft on paper. A 1536×1024 certificate stretched across the width of a landscape Letter page prints at about 140 PPI.
Set the resolution when you start a design
Decide the print size before you design anything. Enlarging a finished layout to print size is where quality gets lost.
In Picify's editor
The Picify editor runs in the browser and works without an account.
- Open the editor and choose File ▸ New Project.
- Pick a preset from the Print or Photo category. For a size without a preset, choose Pixels as the unit and type the Width and Height from the table above.
- Set the resolution to Print High (300). The other options are Screen (72), Web (96), Print Low (150) and Professional (600).
- Check the Dimensions: summary line against the table.
- Click Create Project.
Three things to know before you send the file to a printer:
- Exports are 2× the canvas size. In design mode, File ▸ Export as ▸ PNG, JPG or PDF saves at twice the canvas pixel size. A 2550×3300 Letter canvas downloads as 5100×6600, which is 600 PPI at Letter size. It prints fine, but the file is bigger. If your printer wants exact pixel dimensions, scale the export down afterwards, for example with the image resizer (up to 10000 px per side; uploading needs a free Picify account).
- PDF export is a picture. It is one page the size of the canvas containing a PNG of your design. Text is not kept as vector text, so the pixel count matters for PDFs too.
- CMYK Color is cosmetic. In the New Project dialog, it only changes the Est. File Size readout, and exports are RGB. Some print shops convert RGB files for you; ask yours whether it needs CMYK.
Effective PPI of Picify's print templates
Template creators export PNG or JPG at their fixed canvas size (downloading needs a free account). Some canvases are built for 300 PPI and some aren't:
| Template | Canvas | Effective PPI at its print size |
|---|---|---|
| Flyer, Event Flyer, Letterhead, Sticker Sheet | 2550 × 3300 | 300 at 8.5 × 11 in |
| Poster, Event Poster | 5400 × 7200 | 300 at 18 × 24 in |
| Book Cover | 1800 × 2700 | 300 at 6 × 9 in |
| Invitation Card, Wedding Invitation, Save the Date | 1500 × 2100 | 300 at 5 × 7 in |
| Menu, Calendar, Resume/CV, Proposal | 816 × 1056 | 96 at 8.5 × 11 in |
| Tri-Fold Brochure | 1100 × 850 | 100 at 11 × 8.5 in |
The 816×1056 and 1100×850 templates are fine on screen or as an emailed image, but they will look soft printed at full Letter size. To print one of those layouts, rebuild it in the editor on a Letter Portrait canvas at Print High (300).
Add bleed if your printer asks for it
Bleed is extra image past the trim edge, so the cutter doesn't leave thin white slivers at the edges. A common bleed is 0.125 inch per side. Picify has no bleed setting or crop marks, so add the bleed to the canvas size yourself.
A Letter page with 0.125-inch bleed is 8.75 × 11.25 inches, or 2625 × 3375 pixels at 300 PPI. Keep text and logos well inside the trim line.
Can you increase DPI after the fact?
You can change the number easily. Making the print sharper is a different matter.
Change the number without changing pixels
You can rewrite the resolution note without touching the pixels. That makes the image print smaller and sharper by default, or gets it past a print shop's upload checker. The image data stays the same.
On a Mac, open the image in Preview and choose Tools ▸ Adjust Size…. Turn off Resample image, type 300 in Resolution, then save. The width and height in inches shrink to match, and the pixel count stays the same.
If a printer says your file is "72 DPI," check the pixel dimensions first. A 2550×3300 file marked 72 DPI still has enough pixels for 8.5 × 11 inches at 300 PPI. Tell the printer the size you want, or change the note as above.
Add pixels by enlarging (upscaling)
Enlarging adds pixels, but a normal resize creates them by blending neighboring pixels. A 1024 px logo stretched to 3000 px has nearly 3 times as many pixels per side and no new detail. Edges go soft and text looks fuzzy. Resizing without losing quality explains how far you can push it.
AI upscalers predict plausible detail instead of blending. That can work for photos, but it can also distort text and fine lines. Picify doesn't include an upscaler: its AI images come out at 1024 to 1536 pixels per side, and that is the size you get.
What actually gives you a sharper print
- Go back to the source. Use the original camera file, the full-size export or the editable project, not a copy someone sent you.
- Rebuild at print size. Create a canvas from the table above and lay the design out again. Text and shapes added there are drawn at the canvas size. Photos and AI images placed in the layout still need enough pixels for the space they fill.
- Use vector art for logos. Vector files have no PPI and scale to any size. Picify's AI logos are raster (1024×1024 PNG, JPG or WebP), so plan for that if you need a logo for signage. See vector vs raster images.
- Print smaller, or at 150 PPI. A 1024×1024 image is sharp at about 3.4 inches square and acceptable up to about 6.8 inches square when viewed from a distance.
If you're starting a print project now, open the editor, pick the matching print preset and set Print High (300) before you add anything.