To make an infographic, choose one message and an infographic type that fits it. Cut your data down to the few numbers that prove that message, and sketch the layout on paper. Then build it in a design tool and check every word and number before you export.
If you use AI for the base design, treat any text, numbers and charts it draws as placeholders. Image models misspell words and draw charts that don't match real data, so you replace those parts with live text and accurately sized shapes in an editor.
The build steps below use Picify's AI Infographic Generator and free editor (we make Picify). The last sections cover when a dedicated infographic tool such as Piktochart or Venngage is the better choice.
Pick the story and the type of infographic
An infographic should make one point. Write that point as a single sentence before you open any tool, for example "Remote teams that document decisions ship faster" or "Here's how our return process works in five steps." If you can't write the sentence, you're not ready to design.
The sentence usually tells you which type to use:
| Type | Use it when your point is… | Typical layout |
|---|---|---|
| Statistical | "These numbers matter" | Large key figures, simple charts |
| Timeline | "This happened in this order over time" | Vertical or horizontal line with dated points |
| Process / How-To | "Do these steps in order" | Numbered steps with arrows or icons |
| Comparison | "A vs B" | Two columns, matching rows |
| List | "Here are N tips, tools or reasons" | Stacked blocks with icons |
| Geographic | "It differs by place" | Map with labels or shaded regions |
| Hierarchical | "This is how it's structured or ranked" | Pyramid, tree or org chart |
The AI Infographic Generator offers the same types (Process and How-To are separate options there), so you can pick the matching one when you generate. For layouts that work for each type, see our infographic examples by type.
Collect and simplify your data
Most weak infographics fail here, not in the design.
- Keep only numbers that support your sentence. If a figure is interesting but off-topic, cut it.
- Aim for one number per section. A reader should be able to scan each block in a few seconds.
- Use the same units and time frame throughout. Don't mix monthly and yearly figures, or percentages and raw counts, in one chart.
- Round sensibly. "38%" reads faster than "37.84%", unless the precision is the point.
- Write down the source and date of every figure in a separate note. You'll put a short source line at the bottom of the graphic.
- Draft all the final text now: title, subtitle, section headings, labels and the source line. You'll paste it into the editor later, which avoids retyping errors.
Sketch the layout
A rough sketch on paper takes five minutes and saves you from rearranging everything in the editor. Mark the reading order:
- Title and one-line subtitle at the top.
- The single most important number or visual, large, right under the title.
- Supporting sections in reading order, top to bottom for a tall graphic.
- Source line and your logo or URL at the bottom, small.
Decide the output size now, because it changes the layout. A tall graphic suits Pinterest and long blog posts; a square one suits Instagram. These sizes are presets in the editor's New Project dialog:
| Where it goes | Editor preset | Size (px) |
|---|---|---|
| Pinterest Pin | 1000×1500 | |
| Instagram feed | Instagram Post | 1080×1080 |
| Wide blog or share image | Blog Featured | 1200×628 |
| US Letter print | Letter Portrait | 2550×3300 |
| A4 print | A4 Portrait | 2480×3508 |
The two print presets are 8.5×11 in and A4 at 300 pixels per inch. For more on ratios, see what aspect ratio means.
Generate a base design with AI
An AI generator helps with the look of the infographic: style, colors, icons, illustrations and section structure. It is not reliable for the content. You need a free Picify account to generate.
- Open the AI Infographic Generator and sign in.
- Enter your topic or title (this field is required).
- Pick the type: Statistical, Timeline, Process, Comparison, List, Geographic, Hierarchical or How-To.
- Pick a style: Modern, Flat, Illustrated, Corporate, Colorful, Minimalist, Data-Driven, or Custom to describe your own.
- Choose a color palette preset, or choose Custom and add up to 5 hex colors (your brand colors, for example). Our color palette ideas list combinations with hex codes.
- In Additional Details, describe the structure from your sketch, such as "five numbered steps from top to bottom, one icon per step." Keep the words you ask the model to print short. You'll add the real text yourself.
- Click the generate button and wait. A generation typically takes around half a minute, longer when the generators are busy.
- If the layout is wrong, click Regenerate. When you have one you like, click Download PNG, or Advanced Editor to open it in the editor in a new tab.
Know what you're getting:
- One square image per run, 1024×1024 px. For a tall infographic, generate two or three sections separately. Then stack them in a tall editor project, or use Merge Images with the Vertical layout.
- A flat picture, not editable objects. Text and chart bars are pixels. You can't click a label and change it.
- Text can be misspelled and figures can be wrong. Treat any bar heights, pie slices or numbers in the image as decoration, not your data.
- The free plan includes 10 AI generations per calendar month. Each regenerate counts as one. You can also add your own OpenAI or Straico key, which Picify doesn't limit (set up your own API key).
Add accurate text and numbers in the editor
The Picify editor runs in your browser and needs no account for editing and exporting.
Set up the canvas
- For a specific output size, choose File ▸ New Project, pick a preset (or Custom) and click Create Project.
- Add the AI image with File ▸ Import Image.... If you clicked Advanced Editor on the generator page, the image is already on the canvas.
- Press V for the Move tool and move and scale the image into place.
- In the Layers panel, click the lock toggle on the image so you don't move it by accident while adding text.
- Choose View ▸ Rulers, then add guides from View ▸ Guides ▸ New Horizontal Guide or New Vertical Guide to keep margins even.
Cover the AI's text and fake numbers
- Press I for the Eyedropper and click the plain background next to the text you want to hide, to sample its color.
- Press U for the Rectangle tool and draw a box over the wrong text.
- In the Properties panel, set the box's Fill to the background color and remove any Stroke. If you need the exact hex value, the Color Picker reads it from your image.
On a textured or gradient background, a flat box will show. Use the Clone Stamp (S, then Option-click or Alt-click to set the source) or the Spot Healing Brush instead. If the tools don't change the image, unlock its layer first. Our Clone Stamp guide walks through it.
Add the real text
- Press T for the Text tool, click where the text goes, and paste your drafted copy.
- Pick a font. The editor has 44, including Inter, Montserrat, Poppins, Roboto, Lato, and Bebas Neue for big numbers. You can't upload your own font.
- Use at most two fonts and three sizes: one for the title, one for key numbers, one for labels.
- Press Esc to leave text editing.
More detail is in the help page on adding text and shapes.
Draw charts that match your data
For a bar chart, draw each bar with the Rectangle tool and set its exact height under Position & Size in the Properties panel. Scale every bar against the largest value. If your tallest bar is 600 px for a value of 40, a value of 25 gets 25 ÷ 40 × 600 = 375 px, and a value of 10 gets 150 px. Keep the same width and gap for every bar, and let the smart guides line them up.
The editor has no chart tool. For pie, donut or line charts with real values, build the chart in your spreadsheet app, save it as an image and bring it in with File ▸ Import Image....
Proofread before you export
- Every number matches your data note.
- Every word is spelled correctly, including any small AI text you didn't cover.
- The source line and date are present.
- The reading order still matches your sketch.
Export for web and print
Choose File ▸ Export as and pick a format. Details are in the help page Exporting Your Work.
For the web and social
- PNG keeps text sharp and flat colors clean, so it's the safe default for infographics. JPG makes smaller files but can soften fine text. See PNG vs JPG.
- Exports from a project are twice the canvas pixel size. A 1000×1500 project downloads at 2000×3000. If a platform needs the exact size, resize the file with the Image Resizer.
- If the file is too heavy for your site, the Image Compressor shrinks it. Its output is always JPEG, so check that small text still reads. More options are in how to reduce image file size.
For print
- Start from the Letter Portrait or A4 Portrait preset. Don't stretch the 1024×1024 AI image across a full page: at 300 pixels per inch it covers only about 3.4 inches, so use it as one section or illustration. DPI vs PPI explains why.
- PDF export is a single page containing a PNG of your design. It is not vector, not CMYK, and has no bleed or crop marks. That's fine for an office printer. For a commercial printer, ask first whether they accept RGB files without bleed.
- SVG keeps shapes and text as vectors and embeds images as they are. Use it if someone needs to edit the layout in a vector app later.
Your project auto-saves in the browser you're using every 30 seconds. There is no cloud copy, and clearing site data deletes it, so export a PNG once you're done.
Other ways to make an infographic
Picify's approach gives you an AI-styled base image and a free layer editor for the accurate parts. Dedicated infographic tools work differently: their AI produces a design where charts and labels stay editable, so you don't rebuild text by hand.
| Method | Good for | Cost (as of November 2026) | Main limit |
|---|---|---|---|
| Picify AI generator + editor | A distinctive look, then exact text and bars added by hand | Free plan with 10 AI images a month; editor free with no account; Pro is a one-time payment, $59 | AI output is a flat image; charts and text need rebuilding |
| Picify editor only | Full control, no AI, no sign-up | Free | You design everything yourself |
| Piktochart | Editable AI infographics from a prompt, pasted text or an uploaded PDF, DOCX or TXT file; AI chart and diagram generators | Free plan; Pro $10/member/month billed yearly or $15 billed monthly | Subscription per member; third-party sources report the free plan allows only 2 PNG downloads a month |
| Venngage | Template-heavy business and data infographics; editable AI output | Free plan; Premium listed as $10 or $19 a month depending on billing | Third-party sources report the free plan is limited to 5 designs; PDF and PowerPoint export need Business |
Piktochart's own comparison page describes Canva as broader for general social and marketing graphics, and its own focus as infographics, reports and presentations. If you turn documents or data into infographics every week, a subscription to one of these specialist tools will probably save you time. If you make one occasionally and want it to look different from template-based designs, the AI-plus-editor route costs nothing extra.
If it doesn't work
- The AI image has garbled or misspelled words. This is a limitation of image models, and regenerating won't reliably fix it. Cover the text and retype it in the editor, as described above. Asking for fewer words in Additional Details gives the model less to get wrong.
- The chart in the AI image doesn't match your numbers. AI-drawn charts are illustrations, not plots of your data. Rebuild the bars with rectangles at calculated heights, or import a chart from your spreadsheet.
- "Image generators are still busy. Please try again in a moment." Picify waited and retried for about two and a half minutes before giving up. Wait a minute and generate again.
- "You've used all 10 free AI designs this month." The counter resets when the calendar month changes. Until then, use your own API key, see the options on the pricing page, or build the design in the editor without AI.
- The image didn't arrive in the editor after Advanced Editor. Download the PNG from the generator page instead, then add it with File ▸ Import Image....
- The print looks soft or pixelated. The design has too few pixels for its printed size, usually because a 1024 px AI image was stretched. Rebuild on a print preset and keep text as live text, not part of the AI image.
- Your editor project is gone. Projects live in one browser on one device. Check that you're in the same browser and haven't cleared site data. From now on, export a PNG whenever you finish a version.
FAQ
Can I make an infographic for free? Yes. The Picify editor is free and needs no account, and a free account adds 10 AI generations a month. Piktochart and Venngage also have free plans, with download and design limits.
What size should an infographic be? It depends where it goes. A 2:3 vertical image such as 1000×1500 suits Pinterest, 1080×1080 suits an Instagram post, and Letter or A4 at 300 pixels per inch suits print. See Pinterest pin size for tall graphics.
Can I trust the numbers in an AI-generated infographic? No. Treat every figure, label and chart shape in an AI image as a placeholder, and replace it with your sourced data before you publish.