Black Friday$1,444 of tools, $249 once · --d --h left →
tutorials

How to Make a QR Code With a Logo (That Still Scans)

Add a logo to a QR code without breaking it: pick the right error correction level and logo size, test the scan, and choose PNG or SVG. Free steps.

P
Picify Team · Design & AI Experts
··9 min read
how to make a qr code with a logobest free qr code generator with logo

To make a QR code with a logo, use a generator that accepts a logo upload, set error correction to Quartile (25%) or High (30%), keep the logo small and centered, and scan a printed copy at its final size before you print in volume. In Picify's free QR Code Generator, you enter your link, choose High (30%), upload the logo under Logo (Optional), and download a PNG. The SVG download leaves the logo out, so use the PNG if you want the logo in the file.

How a logo fits inside a QR code

A QR code is a grid of small dark and light squares called modules. A logo can sit on top of the code because QR codes are designed to survive damage. Some parts of the grid have fixed jobs, though, and a logo must never cover them:

  • The three finder patterns. These are the large squares in three corners. Phones use them to find the code and work out its angle.
  • The quiet zone. This is the empty margin around the code. The QR standard calls for a margin 4 modules wide, so don't crop it off or run a busy background up to the edges.
  • Contrast between modules. The scanner needs a clear difference between dark and light modules.

The center of the code holds ordinary data. A logo placed there hides some of that data, and the code's error correction rebuilds what's missing. That's why logos go in the middle and nowhere else.

Pick the right error correction level

Error correction adds redundant data to the code. The scanner uses it to recover parts that are hidden, smudged or torn. QR codes have four levels, and the percentage is roughly how much of the code can be lost:

LevelUse it for
Low (7%)Plain codes with no logo, shown on screens
Medium (15%)Plain codes that might get scuffed
Quartile (25%)Codes with a small logo
High (30%)Codes with a logo, or printed codes that may get worn

Picify uses these same labels and marks Quartile (25%) as "Good for logos" and High (30%) as "Best for logos".

Two things to know before you pick:

  1. The logo shouldn't use up the whole budget. If error correction can recover 30% and your logo hides close to 30%, a small crease or some glare on the printed code is enough to break it. Leave some margin.
  2. Higher error correction makes the code denser. The same link needs more modules at High than at Low, so each module is smaller at a given print size. Keep the content short to offset this: a short URL makes a simpler code with bigger modules, and those cope better with a logo.

If your link is long, set up a short page on your own domain (for example yoursite.com/menu) and point the QR code there. That also lets you change the destination later, which matters because a static code like Picify's can't be edited once it's printed.

Make a QR code with a logo in Picify

The generator runs in your browser: the code and your logo are processed on your device, not uploaded to a server. You need a free Picify account to download the result.

  1. Open the QR Code Generator.
  2. Under Content Type, choose what the code should hold: URL, Text, Email, Phone, WiFi or vCard.
  3. Enter the content. For a website, paste the full address. For WiFi, enter the network name and password, pick the encryption (WPA/WPA2, WEP or None), and turn on the hidden-network option if your network doesn't broadcast its name. For vCard, fill in the contact fields (first and last name, email, phone, company, title, website).
  4. Set the foreground and background colors. Keep the foreground dark and the background light, with strong contrast.
  5. Set error correction to High (30%). Use Quartile (25%) only if your content is long and the code looks too dense at High.
  6. Under Logo (Optional), upload your logo.
  7. Adjust the logo size. The slider runs from 10% to 30% of the code. Start near the low end and go larger only while the code still scans (see the next section).
  8. Set the size. It runs from 100 to 500 px.
  9. Download the PNG. If you're signed out, a sign-in window opens; after you sign in with Google or email, you return to the generator. The file is saved as qr-code-<timestamp>.png.

Picify places the logo on a square filled with the background color, so it stays readable over the modules. A logo with a transparent background looks cleanest on that square. If yours has a white box around it, see how to make a logo background transparent.

Use a simple version of your logo. An icon or monogram stays recognizable at this size; a full wordmark with a tagline usually doesn't.

For every option in detail, see the QR Code Generator guide in our Help Center.

Test the code before you print

A code that scans on your monitor can still fail on a printed menu. Test it the way people will actually scan it:

  1. Scan it with a phone camera. On iPhone, open the Camera app and point it at the code. On most Android phones, the camera app or Google Lens reads QR codes.
  2. Check the destination. Open the link and confirm it's the right page. For WiFi codes, make sure the phone actually joins the network.
  3. Try more than one phone if you can, including an older one.
  4. Print a test copy at the final size and scan it from the distance people will stand at, in the lighting where it will hang.
  5. If it fails or is slow, shrink the logo, switch to High (30%), shorten the content or print the code larger. Then test again.

Don't skip the printed test for anything you'll print in volume, such as business cards, flyers, packaging or signs.

PNG or SVG: which file to download

Picify offers PNG and SVG downloads, and they differ in one way that matters here: the SVG does not include your logo. Only the PNG has the logo built in.

PNGSVG
Logo includedYesNo
Scales without blurNo (max 500 px)Yes
Best forScreens, social posts, emails, small printLarge print, where you add the logo yourself

How big a 500 px PNG prints. Print size depends on pixel density (DPI vs PPI explains the terms):

  • At 300 PPI, 500 px prints about 1.67 in (4.2 cm) wide.
  • At 150 PPI, it prints about 3.3 in (8.5 cm) wide.

That's enough for small print like business cards and flyers. Stretch the PNG much beyond that and the edges of the modules soften. For posters and signs, start from the SVG and add the logo in your layout:

  1. Keep High (30%) selected and download the SVG.
  2. Place it in your design file.
  3. Draw a small square in the background color at the center of the code.
  4. Put your logo on top of the square. Keep it no larger than the size that scanned in your PNG test.
  5. Export your design and scan a printed test copy.

The vector vs raster explainer covers why the SVG stays sharp at any size.

We make Picify, so weigh our view accordingly; we've tried to be fair here. As of November 2026, these are the realistic free options:

OptionLogoAccount neededVector downloadStyling
Picify QR Code GeneratorYes, 10–30% size sliderFree account to downloadSVG, without the logoForeground and background colors
QR Code MonkeyYes (PNG, JPG, GIF or SVG up to 2 MB, per Capterra)No, for static codesFree vector formatsCorner and body shapes, eye frames, gradients
Plain code + logo added in a design appYou place itDepends on the appYes, if you start from SVGWhatever your design app offers

Pick QR Code Monkey if you want custom shapes, eye frames or gradients, don't want an account, or need a free vector file. Check that the vector file includes your logo before you send it to print.

Pick Picify if you're already making the business card, flyer or menu the code goes on in Picify, or you want the logo-size slider and labeled error correction levels in one place with processing in your browser.

Add the logo yourself if you need a large vector print and want full control over placement.

Both generators make static codes for free. QR Code Monkey points you to a separate paid product for dynamic (editable or trackable) codes. Picify doesn't offer dynamic codes.

If your QR code with a logo doesn't scan

The phone doesn't react at all

The logo is probably too large for the error correction level. Lower the logo size, set High (30%) and test again. If you placed the logo yourself, check that it isn't touching a corner finder pattern.

It scans on screen but not on paper

The code is printed too small for its density, or the paper adds glare. Print it larger, shorten the URL so the code has fewer modules, or use a matte finish.

The colors look good but scanning is unreliable

The contrast is too low. Light gray on white, or two mid-tones, often fail. Go back to a dark foreground on a light background; not every scanner reads inverted (light-on-dark) codes.

The code was cropped or sits on a photo

The quiet zone is missing. Leave a plain margin around the code and keep images and text away from its edges.

The logo won't upload

If you see "The QR image or logo could not be loaded. Try another logo.", the file couldn't be read. Re-save the logo as a plain PNG or JPG and upload that. If you see "Canvas rendering is unavailable in this browser.", update your browser or try a current version of another one.

This is expected: Picify's SVG export leaves the logo out. Download the PNG, or add the logo to the SVG yourself as described above.

FAQ

Does adding a logo make a QR code less reliable?

It uses up some of the error correction that would otherwise cover smudges and damage. With High (30%), a small logo and a short link, the code usually scans fine, but always test the printed version.

Can I change where the QR code points after printing?

Not with a static code, which is what Picify makes: the link is stored in the pattern itself. If you expect the destination to change, point the code at a page on your own domain that you can redirect later.

Do QR codes with logos expire?

A static code doesn't expire, because it doesn't depend on any service. It keeps working as long as the page or information it contains is still valid.

Can I see how many people scanned it?

Static codes don't count scans. You can add tracking parameters to the URL and see visits in your website analytics. That makes the link longer and the code denser, so test it again afterwards.